J0GSAP3311 Spectrum analyzer kit 0.3-3 GHz
- Description
- Technical Specifications
Description
J0GSAP3311 Spectrum analyzer kit 0.3-3 GHz
J0GSAP3311 Spectrum analyzer kit consists of Spectrum Compact 0.3-3 GHz, SMA(F) to N(M) adapter, SMA (F) to RP-SMA (F), SMA (F) to RP-SMA (M), N-type adapter female-female, RF cable, 2.92-2.92, AC/DC USB-C charger, Leather bag, USB-C – USB-C Cable, USB-A – USB-C adapter, Lanyard
J0SSAP33, U0ACNM01, J0ASFF01, J0ASFM01, U0ACNN02, J0ACRF02, J0AB451Ci2, J0APAC11, J0ACUB05, J0ACUA31, J0APAC21
J0SSAP33 Spectrum analyzer with touchscreen, 0.3 – 3.000 GHz
Measurements
- Channel Power (measures the total power in a specified bandwidth)
- Adjacent channel power
- Signal bandwidth
- Center frequency
- Interference detection
- Mask
Setup Parameters
- Frequency: Center/Start/Stop
- Trace mode: Normal, Max hold, Cumulative, # of Averages, Min/Max Hold
- Span: Max Span, Min Span, Selected Span
Save
- Proprietary format
- Saves actual data
Sweep Functions
- Sweep: Continuous, Manual Trigger
Trace Functions
- Trace operations: Normal, Max hold, # of Averages, Cumulative, Min/Max Hold
Marker Functions
- Marker: Peak search, set marker to center
Settings
- LNA ON/OFF
- RBW, VBW
| Frequency
Frequency Range 300 – 3000 MHz Frequency Resolution 10 kHz Frequency Reference Aging ±1.0 ppm/1 year Accuracy: ±2.5 ppm (25°C ±25°C) + aging Frequency span 1 MHz to full |
| Bandwidth (Performance Sweep Mode)
RBW 10 kHz; 30 kHz; 100 kHz; 300 kHz VBW 1 kHz; 3 kHz; 10 kHz; 30 kHz; 100 kHz; |
| Amplitude Ranges
Measurement Range DANL to +20 dBm Amplitude Accuracy (single sine wave input, Performance Sweep Mode) 20° C to 30° C Typical: ±1 dB |
| VSWR 300 – 3000 MHz < 1.5 |
| Input attenuator 30 dB with 1 dB step |
| SSB Phase Noise
20°C to 30°C, Fc = 1 GHz Carrier offset 100 kHz offset <-90 dBc/Hz |
| Maximum Input Level
DC voltage 0 V CW RF power Attenuation = 30 dB ; + 20 dBm (100 mW), LNA = OFF Max. Damage level + 27 dBm |
| Displayed Average Noise Level (DANL)
Attenuation = 0 dB, RBW = VBW = 10 kHz, AVG detector, trace average 16, 20°C to 30°C, input impendence = 50 Ω LNA ON 300 MHz to 3 GHz -128 dBm typ LNA OFF 300 MHz to 3 GHz -108 dBm typ |
| Level Display
Trace detectors AVG; MAX; MIN Trace functions Clear write, max hold, average, cumulative, min/max hold |
| Frequency response
300 – 3000 MHz; amplitude accuracy ±1 dBm |
| LNA
Gain 300 – 3000 MHz +20 dB |
| RF Input Connector
Impedance 50 Ω (nom.) Connector SMA F |
