Advanced Wireless Technology is a world leader in PIM testing and PIM Test Equipment.
What sets AWT apart id the ability to apply continuous CW power to your devices to test under real world conditions. Anritsu PIM analyzers for example use pulsed power and the actual power being applied to cables and devices is very small verses the 43dBM signals transmitted by AWT PIM Analyzers. We invite you to review the complete line of AWT equipment. In addition AWT has PIM Loads, cables RF Semi Anechoic Antenna Test Chambers, RF Shield Boxes, Ceramic Filters, Radar Signal Generators and Radar Target Simulators
AWT’s PIM Test Systems Selection Guide.
-
PIM LoadLow PIM Load / Termination 50W for Test and Measurement
PIM rating better than -165 dBc @ 2 x 43 dBm
Frequency range: 380 / 698 to 2800 / 3800 MHz
Dual port: DIN 7/16 (f), DIN 7/16 (m)Brands: AWT-GlobalSelect options This product has multiple variants. The options may be chosen on the product page -
Pim AnalyzerPEMCTRL Switch and Control unit for PEM, Expandable PIM Analyzers – PEM Series
Production testing requires fast and highly reliable PIM analyzers. As the spectrum of manufactured products widens, PIM analysis may have to be performed on additional frequencies. Our Expandable PIM Analyzer…
Brands: AWT-Global -
PIM LoadPLOAD100 Low PIM Load / Termination 100W
PIM rating up to -165 dBc @ 2 x 43 dBm
Frequency range: 385 / 698 to 2800 MHz
Forced air cooled, low temperature versions availableReliable Test and Measurement…
Brands: AWT-Global -
PIM LoadPLOAD100-F Low PIM Load / Termination 100W
PIM rating up to -165 dBc @ 2 x 43 dBm
Frequency range: 385 / 698 to 2800 MHz
Forced air cooled, low temperature versions availableReliable Test and Measurement…
Brands: AWT-Global -
PIM Load
PLOAD100L Low PIM Load / Termination 100W
PIM rating up to -165 dBc @ 2 x 43 dBm
Frequency range: 385 / 698 to 2800 MHz
Forced air cooled, low temperature versions availableReliable Test and Measurement…
Brands: AWT-Global -
PIM Load
PLOAD100L-F Low PIM Load / Termination 100W
PIM rating up to -165 dBc @ 2 x 43 dBm
Frequency range: 385 / 698 to 2800 MHz
Forced air cooled, low temperature versions availableReliable Test and Measurement…
Brands: AWT-Global -
Pim AnalyzerPS1L1500 – LTE-JP1500 – Tx 1488 ~ 1520 MHz, Rx 1456 ~ 1480 MHz
AWT’s S1L Series PIM analyzers are fully conform to PIM standard IEC62037. These PIM testers have a very low noise floor, are very sensitive and come with a wealth of…
Brands: AWT-Global -
Pim Analyzer
PS1L1800 – DCS/GSM1800 – Tx 1805 ~ 1880 MHz, Rx 1710 ~ 1785 MHz
AWT’s S1L Series PIM analyzers are fully conform to PIM standard IEC62037. These PIM testers have a very low noise floor, are very sensitive and come with a wealth of…
Brands: AWT-Global -
Pim Analyzer
PS1L1900 – PCS1900 – Tx 1930 ~ 1990 MHz, Rx 1850 ~ 1910 MHz
AWT’s S1L Series PIM analyzers are fully conform to PIM standard IEC62037. These PIM testers have a very low noise floor, are very sensitive and come with a wealth of…
Brands: AWT-Global -
Pim Analyzer
PS1L1921PA – PCS1900 / AWS 2100 – Tx(1930 ~ 1935 & 2110 ~ 2155) MHz, Rx(1850 ~ 1910 & 1710 ~ 1755) MHz
AWT’s S1L Series PIM analyzers are fully conform to PIM standard IEC62037. These PIM testers have a very low noise floor, are very sensitive and come with a wealth of…
Brands: AWT-Global -
Pim Analyzer
PS1L2000TD – TD-SCDMA(2000) – Tx 2010 ~ 2025 MHz, Tx 1900 ~ 1920 MHz
AWT’s S1L Series PIM analyzers are fully conform to PIM standard IEC62037. These PIM testers have a very low noise floor, are very sensitive and come with a wealth of…
Brands: AWT-Global -
Pim Analyzer
PS1L2100AWS _ AWS – Tx 2010 ~ 2155 MHz, Rx 1710 ~ 1755 MHz
AWT’s S1L Series PIM analyzers are fully conform to PIM standard IEC62037. These PIM testers have a very low noise floor, are very sensitive and come with a wealth of…
Brands: AWT-Global
