Accessories

  • Hot

    8710-1582CC 5 lb-in, 5/16 Inch torque wrench

    The Custom-Cal 8710-1582CC is a 5 lb-in, 5/16 Inch torque wrench. When mating two connectors it is important to keep the connectors from rotating relative to one another.

    $145.00
    Brands:
  • Hot

    8710-1765CC 8 lb-in, 5/16 Inch torque wrench

    The Custom-Cal 8710-1765CC is an 8 lb-in, 5/16 Inch torque wrench. When mating two connectors it is important to keep the connectors from rotating relative to one another.

    $145.00
    Brands:

  • CC-5002-LF

    The Custom-Cal CC-5002-LF 50 ohm, 3.5 mm Load Female’s housing is constructed from gold plated copper and the center pin is gold plated beryllium.

    • Frequency Range: DC to 26.5 GHz.
    • Impedance: 50 ohm.
    • Return Loss: 44 dB minimum, 46 dB typical (dc to <= 3 GHz), 36 dB minimum, 40 dB typical (> 3 to <= 6 GHz), 30 dB minimum, 34 dB typical (> 6 to <= 26.5 GHz).
    $645.00
    Brands:

  • CC-5002-LM

    The Custom-Cal CC-5002-LM 50 ohm, 3.5 mm Load Male’s housing is constructed from gold plated copper and the center pin is gold plated beryllium.

    • Frequency Range: DC to 26.5 GHz.
    • Impedance: 50 ohm.
    • Return Loss: 44 dB minimum, 46 dB typical (dc to <= 3 GHz), 36 dB minimum, 40 dB typical (> 3 to <= 6 GHz), 30 dB minimum, 34 dB typical (> 6 to <= 26.5 GHz).
    $468.00
    Brands:

  • CC-5002-OF

    The Custom-Cal CC-5002-OF 50 ohm, 3.5 mm Open Female’s housing is constructed from gold plated copper and the center pin is gold plated beryllium.

    • Frequency Range: DC to 26.5 GHz.
    • Impedance: 50 ohm.
    • Phase: ±0.65° deviation from nominal (dc to <= 3 GHz), ±1.2° deviation from nominal (> 3 to <= 8 GHz), ±2° deviation from nominal (> 8 to <= 26.5 GHz).
    $645.00
    Brands:

  • CC-5002-OM

    The Custom-Cal CC-5002-OM 50 ohm, 3.5 mm Open Male’s housing is constructed from gold plated copper and the center pin is gold plated beryllium.

    • Frequency Range: DC to 26.5 GHz.
    • Impedance: 50 ohm.
    • Phase: ±0.65° deviation from nominal (dc to <= 3 GHz), ±1.2° deviation from nominal (> 3 to <= 8 GHz), ±2° deviation from nominal (> 8 to <= 26.5 GHz).
    $468.00
    Brands:

  • CC-5002-SF

    The Custom-Cal CC-5002-SF 50 ohm, 3.5 mm Short Female’s housing is constructed from gold plated copper and the center pin is gold plated beryllium.

    • Frequency Range: DC to 26.5 GHz.
    • Impedance: 50 ohm.
    • Phase: ±0.65° deviation from nominal (dc to <= 3 GHz), ±1.2° deviation from nominal (> 3 to <= 8 GHz), ±2° deviation from nominal (> 8 to <= 26.5 GHz).
    $645.00
    Brands:

  • CC-5002-SM

    The Custom-Cal CC-5002-SM 50 ohm, 3.5 mm Short Male’s housing is constructed from gold plated copper and the center pin is gold plated beryllium.

    • Frequency Range: DC to 26.5 GHz.
    • Impedance: 50 ohm.
    • Phase: ±0.65° deviation from nominal (dc to <= 3 GHz), ±1.2° deviation from nominal (> 3 to <= 8 GHz), ±2° deviation from nominal (> 8 to <= 26.5 GHz).
    $468.00
    Brands:

  • CC-5002-TF
    The Custom-Cal CC-5002-TF 50 ohm, 3.5 mm through female’s housing is constructed from gold plated copper and the center pin is gold plated beryllium.
    • Frequency Range: DC to 26.5 GHz.
    • Impedance: 50 ohm.
    • Insertion Loss: 0.2 dB maximum, 0.1 dB typical. Return Loss: 30 dB minimum, 34 dB typical (dc to <= 8 GHz), 28 dB minimum, 32 dB typical (> 8 to <= 18 GHz), 26 dB minimum, 30 dB typical (> 18 to <= 26.5 GHz).
    $645.00
    Brands:

  • CC-5002-TFM

    The Custom-Cal CC-5002-TFM 50 ohm, 3.5 mm through female to male housing is constructed from gold plated copper and the center pin is gold plated beryllium.

    • Frequency Range: DC to 26.5 GHz.
    • Impedance: 50 ohm.
    • Insertion Loss: 0.2 dB maximum, 0.1 dB typical. Return Loss: 30 dB minimum, 34 dB typical (dc to <= 8 GHz), 28 dB minimum, 32 dB typical (> 8 to <= 18 GHz), 26 dB minimum, 30 dB typical (> 18 to <= 26.5 GHz).
    $645.00
    Brands:

  • CC-5002-TM

    The Custom-Cal CC-5002-TM 50 ohm, 3.5 mm through male to male housing is constructed from gold plated copper and the center pin is gold plated beryllium.

    • Frequency Range: DC to 26.5 GHz.
    • Impedance: 50 ohm.
    • Insertion Loss: 0.2 dB maximum, 0.1 dB typical. Return Loss: 30 dB minimum, 34 dB typical (dc to <= 8 GHz), 28 dB minimum, 32 dB typical (> 8 to <= 18 GHz), 26 dB minimum, 30 dB typical (> 18 to <= 26.5 GHz).
    $468.00
    Brands:

  • CC50-3.5-26

    The Custom-Cal CC50-3.5-26 is a 50 Ohm, DC to 26.5 GHz, 3.5 mm-type Standard Calibration Kit. It consists of a; CC-5002-OF Open Female Connector, CC-5002-OM Open Male Connector, CC-5002-SF Short Female Connector, CC-5002-SM Short Male Connector, CC-5002-LF Load Female Connector, CC-5002-LM Load Male Connector, CC-5002-TF Through Female to Female Connector, CC-5002-TFM Through Female to Male Connector, CC-5002-TM Through Male to Male Connector, 7mm flat wrench and a 8710-1765CC 8 in-lbs [0.9 N.m] Break-Over Torque Wrench.

    $3,850.00
    Brands:

  • CC50-3.5-8

    The Custom-Cal CC50-3.5-8 is a 50 Ohm, DC to 8.5 GHz, 3.5 mm-type Standard Calibration Kit. It consists of a; CC-5001-OF Open Female Connector, CC-5001-OM Open Male Connector, CC-5001-SF Short Female Connector, CC-5001-SM Short Male Connector, CC-5001-LF Load Female Connector, CC-5001-LM Load Male Connector, CC-5001-TF Through Female to Female Connector, CC-5001-TM Through Male to Male Connector, 7mm flat wrench and a 8710-1765CC 8 in-lbs [0.9 N.m] Break-Over Torque Wrench.

    $2,950.00
    Brands:

  • CC75-F-3

    The Custom-Cal CC75-F-3 is a DC to 3000 MHz Calibration Kit that contains 75 ohm type-F standards, both male and female, to calibrate network analyzers for measurements of common broadband and CATV components with 75 ohm type-F connectors. It consists of a; CC-7501-OF Open Female Connector, CC-7501-OM Open Male Connector, CC-7501-SF Short Female Connector, CC-7501-SM Short Male Connector, CC-7501-LF Load Female Connector, CC-7501-LM Load Male Connector, CC-7501-TF Through Female to Female Connector.

    $2,750.00
    Brands:

  • GTS-WB-PIM-Standard

     

    GTS-WB-PIM-STD

    Freq (MHz) PIM (dBm) Freq (MHz) PIM (dBm)
    400 -73.5 ± 5 1800 -80.5 ± 5
    700L -81.5 ± 5 1900 -81.0 ± 5
    700U -84.5 ± 5 2100 -77.0 ± 5
    800 -80.5 ± 5 2300 -78.0 ± 5
    900 -81.5 ± 5 2600 -77.5 ± 5

     

    $625.00
    Brands:

  • Horn antenna 17-26 GHz J0AA1724HG01 for SAF Spectrum Compact

    The antenna product family consists of four small-size, wideband (6-11 GHz, 11-17 GHz, 17-26 GHz, 26-40 GHz) conical horn antennas, a smart mounting system, and optional coaxial-to-waveguide adapters.

     

    Select Accessories

     

    $720.00
    Brands:

  • Horn antenna 26-40 GHz J0AA2640HG03 for SAF Spectrum Compact

    The antenna product family consists of four small-size, wideband (6-11 GHz, 11-17 GHz, 17-26 GHz, 26-40 GHz) conical horn antennas, a smart mounting system, and optional coaxial-to-waveguide adapters. Water and shock proof case, tripod and riflescope for direction finding are also available upon request.

     

    Select Accessories

     

    $1,128.00
    Brands:

  • Horn antenna 6-11 GHz J0AA0610HG02 for SAF Spectrum Compact

    Compact, lightweight and reliable conical horn antenna systems are essential part of the ultimate solution for performing microwave  link measurements, performance checks, failure searches and interference detection’s using SAF Spectrum Compact.

    Select Accessories

     

    $1,236.00
    Brands:

  • J0AA06R001 LOS – 6GHz SC horn antenna

    Compact, lightweight and reliable horn antenna is essential part of the SAF Tehnika ultimate solution for performing microwave link Line-of-sight measurements.

    $720.00
    Brands:

  • J60WAGE301 30 dB attenuator V-band (56-67 GHz)

    Attenuator for SAF Spectrum Compact V-band is a fully matched wideband fixed attenuator module with high linearity performance and high dynamic range. No external biasing components needed. Attenuator is ideal for radio TX Power measurements.

    $1,080.00
    Brands:

  • J60WAGE701 70 dB attenuator V-band (56-67GHz)

    Attenuator for SAF Spectrum Compact E-band is a fully matched wideband variable attenuator module with high linearity performance and high dynamic range. No external biasing components needed. Attenuator is ideal for radio TX Power measurements.

    $1,080.00
    Brands:

  • J80WAGE301 30 dB Waveguide Wideband Attenuator (71-86GHz)

    Attenuator for SAF Spectrum Compact E-band is a fully matched wideband variable attenuator module with high linearity performance and high dynamic range. No external biasing components needed. Attenuator is ideal for radio TX Power measurements.

    $1,080.00
    Brands:

  • J80WAGE701-FA 800-70 Waveguide Wideband Attenuator (71-86GHz)

    Attenuator for SAF Spectrum Compact E-band is a fully matched wideband variable attenuator module with high linearity performance and high dynamic range. No external biasing components needed.

     

           J80WAGE701 

    $1,080.00
    Brands:

  • PLOAD100 Low PIM Load / Termination 100W
    • PIM rating up to -165 dBc @ 2 x 43 dBm
    • Frequency range: 385 / 698 to 2800 MHz
    • Forced air cooled, low temperature versions available

    Reliable Test and Measurement (T&M) equipment is paramount when testing modern telecommunications components. Only highest quality loads support accurate measurements.

     

      ds-pload100

     

     wirelesspages

    $725.00
    Brands:

  • PLOAD100-F Low PIM Load / Termination 100W
    • PIM rating up to -165 dBc @ 2 x 43 dBm
    • Frequency range: 385 / 698 to 2800 MHz
    • Forced air cooled, low temperature versions available

    Reliable Test and Measurement (T&M) equipment is paramount when testing modern telecommunications components. Only highest quality loads support accurate measurements.

     

      ds-pload100

     

     wirelesspages

    $870.00
    Brands: