Featured Products
GD-1005N Digital Arbitrary & Function Generator
$460.00DDS Digital Synthesis Technology
3.5” TFT Color LCD Display
180MSa/s Max. Sampling Rate, 14bit Resolution
Sine, Pulse, Square, Ramp, Noise, Arb in 33kinds of waveforms
Modulations ( AM, FM, ASK, FSK, PSK, Sweep, Burst )
Dual Output Ports
Plug & Play USB Device, RS-232C Interface(Optional)
Brands: GSI-PROTEK
GSI-Protek A734 / 4.4GHz Handheld Spectrum Analyzer
Protek is ready to provide you with good solution and good service that you need anytime and anywhere.$5,900.00
A734.pdfBrands: GSI-PROTEKProtek 4000 True RMS 4½ Digital Multimeter
Protek gives customers various range of bench type DMM to select upon requirement.$420.00Brands: GSI-PROTEKEBERT 2904 PPG.
The 2904 is a high performance, flexible and cost effective four channel Pulse Pattern Generator (PPG) and Error Detector (ED) that can operate from 24.6 to 29.5 Gb/s along with half rates (consult factory for higher or lower operation).$22,950.00
EBERT_2904_DatasheetBrands: ESOR
J0SSAP14 Spectrum analyzer 24.000 – 40.000 GHz
$5,087.00- Essential tool for link troubleshooting
- Top choice for site survey and acceptance
- Perfect aid for installation and maintenance of antenna systems
- Industry leading -105 dBm receiver sensitivity
- Intuitive control and interactive GUI with instant On/Off functionality
- Resistive LCD touchscreen allows working with gloves on
Spectrum Compact Series Brands: SAF
AV4051H signal / spectrum analyzer 3Hz～50GHz
$72,424.00AV4051 series signal/spectrum analyzer has excellent performance in test dynamic range, phase noise, amplitude accuracy, and test speed. AV4051 series has various test functions including: high-sensitivity spectrum analysis, power measurement, IQ analysis, transient analysis, pulse parameter analysis, audio frequency analysis, analog demodulation measurement, and phase noise test etc.,
Brands: CeYear
PD-5060 (50V,60A)/ 2U Size / Protek SMPS Programmable DC-PowerSupply
$3,850.00Complete Protection : OVP, OCP,OTP
Standard LXI and Isolation RS-485 Interface, optional GPIB interface.
PH Series can store 16 sets of memories; memories can be recalled manually in front panel or by external
CE, LXI approved
Brands: GSI-PROTEKPP700U Portable PIM Analyzer Tx 730 – 759 MHz, Rx 776 – 788 MHz
PP700U Portable PIM Analyzer Tx 730 - 759 MHz, Rx 776 - 788 MHz$21,600.00- Multiple Test Modes: Field Diagnostic, Analyzer with Multi PIM, PIM over Time, Rx Sweep, Single Carrier Mode for system insertion loss measurements, Distance to PIM, VSWR, Distance to
- Embedded DTP, VSWR, DTF
- Variable output power 15 dBm to 44 / Ideal for Macro BTS and DAS.
- Very high PIM sensitivity: -172 dBc @ 2x43 dBm
- PIM vs. Time graph, Min & Maxhold feature. Perfect for static & dynamic PIM measurements
- Removable Case Lid
wirelesspagesBrands: AWT-Global
8710-1765CC 8 lb-in, 5/16 Inch torque wrench
The Custom-Cal 8710-1765CC is an 8 lb-in, 5/16 Inch torque wrench. When mating two connectors it is important to keep the connectors from rotating relative to one another.$145.00Brands: CC-GTS
GTS-G6 Vector Signal Generator , 10 MHz to 6 GHz,-100dBm to 10dBm
$5,450.00- Frequency range: 10MHz to 6GHz
- Power coverage: -100 to +10dBm
- Full range of common digital modulation: BPSK, QPSK, OQPSK, 8PSK, 16QAM, 32QAM, 64QAM, MSK, FSK, output linearity, log scan and multiple modulation mode
- Variety of common signal generating including GSM/ EDGE/CDMA/TD-SCDMA/WCDMA/CDMA2000/TD-LTE/FDDLTE/ NB-IoT/LoR. Users can modify channels under different configuration
- Pulse modulation and sweep mode
- Fixable integration interface, customized data can be input into module to generate customized signal
- Simple control via USB port. Provide API for second-time development
GTS-G6-Vector-Signal-Generator-Datasheet Brands: CC-GTSGTS-A6 Vector Signal Analyzer ,10 MHz to 6 GHz
$5,450.00- Frequency range: 10MHz to 6000MHz
- Signal demodulation: Digital signal, FM, and LTE
- DANL: -166 dBm @1GHz (Sensitivity set to High, normalized to 1Hz)
- Resolution bandwidth: 10Hz to 5MHz
- Signal storage depth of 1Gbit for signal capture and analysis
- API library is provided for secondary development
Brands: CC-GTSGTSX37 Single Fiber Fusion Splicer
$1,870.00- Electrode Life: 4,000 times splicing
- 5.0 Color LCD Monitor
- Average Splicing Loss: 0.02dB
- Shock Proof, Dust Proof and Water Proof
- HD CMOS sensor and HD aligner for double separate optical fibers
- The carrying case built-in worktable
- Up to 200 times of continuous splices and heat
- Splice 0.25 mm/0.9 mm/3.0 mm/ Flat cable
- Ideal for both indoor and outdoor splicing
- Take only 9 Seconds for Splicing,30 Seconds for Heating
GTSX37Brands: CC-GTSGTSFX37 Single Fiber Fusion Splicer
$2,155.00- 4.3-inch high definition capacitive touch screen.
- 320 times image magnification，5 mm fusion splicing for fibers of ultra-short cutting length
- 300 groups of fusion splicing modes，100 groups of heating modes
- USB and SD card interfaces，U-disk automatic software upgrade
- Built-in modular lithium battery,supports 330 times of splicing and heating.
- 7 s fast fusion splicing，18 s highly efficient heating
- Precise fiber core alignment，ultra-low fiber fusion splicing consumption
GTSFX37Brands: CC-GTSGTSQX50-P3 OTDR 1310/1550/1625 nm,38/36/34 dB,130 km, FC, SC, LC connector
$4,960.00- Applicable fiber: SM MM PON
- <1.8 m extra-short event dead zone
- Wavelength: Single mode 1310/1550 nm
- Up to 32/30 dB High Dynamic Range
- Distance Range: 4,8,16,32,64,128,256 km
- 640×480, 5.7 inch TFT-LCD (touch screen)
- One year Warranty
- USB interfaces, supporting USB stick and printer and direct cable download to PC via Active Sync
- Memory capacity >800 traces
- Built-in lithium battery with high capacity for over 8 hours of operating life
- Display: Color LCD
Brands: CC-GTSGTSQX70-MS 850 /1300 +1310 /1550 nm ; 30/28-24, 28dB, OPM, VFL
$4,500.00- Support four interface fiber types
- Smart Link Map.Using the new Link Map with Pass/Fail option, users can easily identify, locate and characterize connectors, splices, splitters, macro bends and fiber ends.
- Color touch screen. Touch and key make operation more varied. To satisfy different people's habits and improve their work efficiency
Brands: CC-GTS1465L signal generator, 100kHz~67GHz
1465 series signal generators, with the frequency range of 100kHz ~ 67GHz, are provided with high purity spectrum and high output power. The single side band phase noise at 10GHz carrier and 10kHz frequency offset is -126dBc/Hz. The maximum output power reaches up to 1W at 20GHz carrier, and the dynamic output power range gets 150dB.$78,485.00Brands: CeYear1465L-V Signal Generator 100 kHz～67 GHz
1465-V series signal generators has excellent vector modulation performance within the frequency range of 100 kHz-67 GHz. It has 200 MHz internal modulation bandwidth and 2 GHz external modulation real-time bandwidth, which can meet various modulation needs of wide-band signals.$148,485.00Brands: CeYearAV3672E Vector Network Analyzer (10MHZ ~ 67GHZ)
$109,091.00- Simple control method: one LAN line, one GPIB card
- Effectively lower the test cost, liberate limited human resources
- Finish more tests in effective time, greatly shorten the development period
- Finish the task impossible for manpower, such as accurate timing, tests under complex environment
Brands: CeYearAV3986H Noise Figure Analyzer (10 MHz～50 GHz)
Call for Price- Wide frequency coverage
- High-sensitivity reception and high-precision measurement performance Chinese and English operation interface, big screen dual channel HD display Amplifier, Up converter and down converter measurement mode
- Single side-band and double side-band measurement function Comprehensive loss compensation function
- Flexible file and table processing functions Passed/failed test notification limit line function Various external interfaces
- Dual noise source drive
Brands: CeYear
English
العربية
简体中文
Nederlands
Français
Deutsch
Italiano
Português
Русский
Español
Türkçe