IT7321 300VA AC Power supply (150V/300V, 3A/1.5A)

IT7321 300VA AC Power supply (150V/300V, 3A/1.5A)

$1,700.00

  • Precision Linear amplification technology, low noise, high stability
  • High power density design, 300VA for ½ 2U, 1500VA for 3U size, save installation space
  • Adjustable frequency:45HZ-500HZ
  • Adjustable phase angle: 0-360°
  • Set the output slew rate of voltage and frequency
  • High current crest factor for inrush current testing
  • TRIAC Dimmer dimming / governor simulation function
  • Output the changed synchronous TTL signal
  • LIST mode for testing power perturbation (PLD) simulation
  • Simulate the surge, trap waveform
  • Voltage dip, short interruption and voltage change simulation
  • Measure various electrical parameters, including RMS voltage / current, actual power, power factor, VA (apparent power), peak current and other parameters
  • Measurement resolution can reach 0.01W / 0.1mA, meet Energy Star standard requirement
  • Built-in GPIB, RS-232, USB and LAN (support SCPI protocol) (* IT7321 models is without GPIB interface)
  • Support three devices connection through System Bus to achieve three-phase AC power function
  • OCP,OVP,OTP,OPP

Catalogue_IT7300-Programmable AC PS

IT7321

SKU: IT7321 Category:
Brands:
Brands

Options & Accessories

for IT8500+

for IT8500+

for IT8500+

for IT-M series

for IT-M series

for IT-M series

for IT-M series

for IT-M series

Product price
Additional options total:
Order total:
View cart

Description

IT7321 300VA AC Power supply (150V/300V, 3A/1.5A)

In order to meet the bigger range of AC power supply and more complex change characteristics, engineers need more powerful and stable AC power supply to simulate the actual working environment. IT7300 series is the best solution in this area. IT7300 series can be widely applied in the electronics and electrical industry, lighting, specification verification of RD, the use of laboratory testing and factory production online test etc.

Product Features

  • Precision Linear amplification technology, low noise, high stability
  • High power density design, 300VA for ½ 2U, 1500VA for 3U size, save installation space
  • Adjustable frequency:45HZ-500HZ
  • Adjustable phase angle: 0-360°
  • Set the output slew rate of voltage and frequency
  • High current crest factor for inrush current testing
  • TRIAC Dimmer dimming / governor simulation function
  • Output the changed synchronous TTL signal
  • LIST mode for testing power perturbation (PLD) simulation
  • Simulate the surge, trap waveform
  • Voltage dip, short interruption and voltage change simulation
  • Measure various electrical parameters, including RMS voltage / current, actual power, power factor, VA (apparent power), peak current and other parameters
  • Measurement resolution can reach 0.01W / 0.1mA, meet Energy Star standard requirement
  • Built-in GPIB, RS-232, USB and LAN (support SCPI protocol) (* IT7321 models is without GPIB interface)
  • Support three devices connection through System Bus to achieve three-phase AC power function
  • OCP,OVP,OTP,OPP

Linear amplification technology

IT7300 Series AC Power Supply adopts advanced and high-precision linear amplification design to provide low noise and high stability output. This technology has high-speed response characteristics, stable low noise, it can simulate the abnormal power line, instantaneous voltage rise, drop and power off, and can be applied to ATE and so on.


TRIAC Dimmer simulation function

ITECH is the pioneer of TRIAC Dimmer function.This function is used to do dimming and speed regulating test for lamp or electric motor to ensure the products work well when controller of dimming and speed regulating is needed.

 

 

 

 

 Front edge phase dimming  

Back edge phase dimming

No power frequency transformer power supply, low power consumption

IT7300 series AC source provide no power frequency transformer power supply with lower power consumption, it solves output problems of large volume, large heat dissipation and low power caused by using frequency transformer , IT7300 series also provide linear adaptation method between the current and AC voltage in AC source, which solves the problem of high energy consumption and low accuracy.

List function

IT7300 series has built-in DDS waveform generator, it has very flexible waveform simulation function. Users can directly set the required power waveform through the panel keys, it can simulate transient power off, surge, trap, specific phase angle on or off, AC sine wave amplitude and frequency range and other characteristics.

STEP                                                              PULS                                                           LIST

Additional information

Weight 10 kg

CD (accessory)
With user manual and communica…

AC power cord (accessory)
AC power cord (accessory)

IT-E123 (Optional)
RS485 optical isolation commun…

IT-E122 (Optional)
USB optical isolation communic…

IT-E121 (Optional)
RS232 optical isolation commun…

IT-254 (Optional)
Cooperate with IT8500+ to comp…

IT-E151A (Optional)
19” Rack mount kit

IT-E151 (Optional)
19” Rack mount kit

IT-E30110-AB (Optional)
10A/1m/Alligator clip – Banana…

IT-E30110-BB (Optional)
10A/1m/Banana plug – Banana pl…

IT-E30110-BY (Optional)
10A/1m/Banana plug – Y termina…

IT-E30312-YY (Optional)
30A/1.2m/Y terminal, a pair of…

IT-E30320-YY (Optional)
30A/2m/Y terminal, a pair of r…

IT-E30615-OO (Optional)
60A/1.5m/round terminal, a pai…

IT-E31220-OO (Optional)
120A/2m/round terminal, a pair…

IT-E31220-OO (Optional)
120A/2m/round terminal, a pair…

IT-E32420-OO (Optional)
240A/2m/round terminal, a pair…

IT-E32410-OO (Optional)
240A/1m/round terminal, a pair…

IT-E33620-OO (Optional)
360A/2m/round terminal, a pair…
has been added to your cart:
Checkout