Description

AV6481 Optical Fiber Fusion Splicer Kit

AV6481 Main characteristics

AV6481 Precise fiber core alignment, ultra-low fiber fusion splicing consumption 7s fast fusion splicing, 18s highly efficient heating.

320 times image magnification, 5mm fusion splicing for fibers of ultra-short cutting length 300 groups of fusion splicing modes, 100 groups of heating modes

10000 groups of fusion records, 64 images storage Ceramic presser foot, ceramic V-block, all-in-one fixture

Dual-direction splicing, automatic splicing, intelligent pyrocondensation USB and SD card interfaces, U-disk automatic software upgrade

Built-in modular lithium battery, supports 220 times of splicing and heating cycles.

 Small and light

• Small in size and light in weight, the splicer is easy to carry and can be lift by one hand.

 Water-resistant, dust-resistant and shock-resistant in desig

• Water-resistant and dust-resistant can meet IP52 requirements.

 All-in-one fixer

• The all-in-one fixture meet fusion splicing demands of multiple fibers, jumpers and rubber-insulted wires with a cladding diameter of 80～150μm.

 Graphical interfaces and touch screen

•  AV6481 uses entirely new GUI graphical interfaces and touch screen in design. Operators can set up the splicer and get to know relevant information of it simply and directly by graphical interfaces.

Entirely new GUI graphical interfaces and touch screen

 Intelligent heat shrinkage

• A detection unit is embedded in the heater. The heating function will only be enabled when the thermal shrinkage tube is put in the heater, to avoid misoperation.

Hear and detection unit

 Large-capacity pluggable lithium battery

•  The built-in pluggable lithium battery with large capacity can answer working demand lasting all day long (typical 220 times of fusion splicing and heating cycles).

Built-in pluggable lithium battery with large-capacity

 Ceramic V-block and ceramic presser foot

•  Ceramic V-block with high precision brings you convenient and accurate placement of optical fibers and makes cleanup easy.

High-precision ceramic V-block and presser foot

 Multi-functional carrying case

•  The multi-functional carrying case is novel in design and light in weight, has built-in compact working bench. Open or close the cover can turn it to a working bench.

Multi-functional carrying case

 

Additional information

Weight	2.06 kg
Dimensions	15.4 × 12 × 13 cm

Model	AV6481
Alignment method	Precise core alignment and cladding alignment
Applicable fibers	Any common optical fibers, rubber-insulated fibers and jumpers that meet requirements of ITU-TG.651~653, ITU-TG.655 and ITU-TG.657.
Optical  fiber diameter	Cladding：80～150μm,  coating  layer: 0.1～3mm
Cutting length	5～16mm（coated  optical  fiber  diameter≤250μm）；10mm（coated  optical fiber diameter：0.25~3mm）
Fusion splicing consum ption（typical value）	0.02dB（SMF）；0.01dB（MMF）；0.04dB（DSF）；0.04dB（NZDSF）
Return loss	Better than 60dB
Fusion   splicing  time (typical value)	7s
Heating  time  (typical value)	18s
Pulling  force test	1.96～2.25N
Thermal  shrinkage tube	60mm,  40mm  and  a  series  of  thermal  shrinkage tubes
Graphical display	High-performance  4.3  inch LCD
Magnification time	320 times/88 times
Fusion  splicing record	10000 groups
Battery capacity	11.1V，6400mAh，typical value of fusion splicing and thermal cycle is  220 times
Battery  service life	Cycle  charging  times  reach  300～500,  can  be  replaced  by customers
Electrode  service life	Typical  value  is  4000  times,  can  be  replaced  by customers
Construction lighting	Built-in  lights  with  high-brightness  and  wide  lighting area
Working  environment	Temp:-10～50℃；hum:  0～95%RH，height  above  sea level:0～6000m
Operation interfaces	GUI  graphical  operation interfaces
External power	AC:  AC100～240V，60Hz，0～1.5A；DC: DC10～15V
External port	USB  / SD
Dimensions	120mm（W）×130mm（H）×154mm（D）（without  rubber  anti-vibration  pad）
Weight	1.59kg（host  engine），0.37kg（battery）

• Standard configuration：

No.	Name	Qty/unit/set
1	Main engine	1
2	Optical fiber cutter	1
3	Miller clamp	1
4	AC power cord	1
5	AC power adapter	1
6	Spare electrode	1
7	Cooling pallet	1
8	Cleanup set	1
9	User Manual	1
10	Multi-functional carrying case	1

• Options：

No.	Name	Model
1	Lithium battery	BTR-81
2	U-disk	ADATA C008/4G
3	Vehicle cigarette lighter wire	DC-72
4	Suspended working bench	HST-81