IT8513B+ Programmable DC Electronic Load 500V/30A/600W
- Four operating modes: CV,CC,CR,CP
- Battery test function, automatic test function, OPP test, OCP test function and CR-LED function.
- Dynamic mode up to 10KHz
- Voltage measurement resolution up to 0.1mV / 0.1mA
- Remote sense
- Short circuit function
- Current monitoring function
- Power-off memory function
- 100 groups memory capacity
- Optional USB / RS232 / RS485 interface
- Description
- Additional information
- Options & Accessories
Description
IT8513B+ Programmable DC Electronic Load 500V/30A/600W
IT8500+series (150W~3000W) single-channel programmable DC electronic loads are designed for middle & high-end applications.They can be offered as multiple solutions according to customer’s design and testing requirements.The user can perform online voltage measurements and adjustments or simulate short circuit test using the simple keypad on the front panel. IT8500+ series DC loads are a versatile instrument for static and dynamic testing of power supplies,batteries,DC – DC converters,battery chargers,provides user the best testing solution.
Features
- Four operating modes: CV,CC,CR,CP
- Battery test function, automatic test function, OPP test, OCP test function and CR-LED function.
- Dynamic mode up to 10KHz
- Voltage measurement resolution up to 0.1mV / 0.1mA
- Remote sense
- Short circuit function
- Current monitoring function
- Power-off memory function
- 100 groups memory capacity
- Optional USB / RS232 / RS485 interface
* IT8514B+, IT8514C+ and IT8516C+ have built-in RS232 and USB interfaces.
Dynamic test function
The dynamic test operation allows the electronic load to be switched between the two setting parameters according to the setting rules. This function is used to test the dynamic characteristics of the power supply.
|
|
|
Battery discharge test functionIT8500 + series electronic load can use constant current mode for battery discharge test. After the discharge test mode is selected, the test mode termination condition “switch off voltage value”, “switch off capacity value” and “discharge time” can be set. When any of the three conditions is satisfied, the discharge is stopped and the electronic load is automatically switched is OFF state. Users can observe the battery voltage, time and battery discharge capacity during the test process. |
Additional information
Dimensions | 21.45 × 35.46 × 8.82 cm |
---|
CD (accessory)
With user manual and communica…
|
AC power cord (accessory)
AC power cord (accessory)
|
IT-E123 (Optional)
RS485 optical isolation commun…
|
IT-E122 (Optional)
USB optical isolation communic…
|
IT-E121 (Optional)
RS232 optical isolation commun…
|
IT-254 (Optional)
Cooperate with IT8500+ to comp…
|
IT-E151A (Optional)
19” Rack mount kit
|
IT-E151 (Optional)
19” Rack mount kit
|
IT-E30110-AB (Optional)
10A/1m/Alligator clip – Banana…
|
IT-E30110-BB (Optional)
10A/1m/Banana plug – Banana pl…
|
IT-E30110-BY (Optional)
10A/1m/Banana plug – Y termina…
|
IT-E30312-YY (Optional)
30A/1.2m/Y terminal, a pair of…
|
IT-E30320-YY (Optional)
30A/2m/Y terminal, a pair of r…
|
IT-E30615-OO (Optional)
60A/1.5m/round terminal, a pai…
|
IT-E31220-OO (Optional)
120A/2m/round terminal, a pair…
|
IT-E31220-OO (Optional)
120A/2m/round terminal, a pair…
|
IT-E32420-OO (Optional)
240A/2m/round terminal, a pair…
|
IT-E32410-OO (Optional)
240A/1m/round terminal, a pair…
|
IT-E33620-OO (Optional)
360A/2m/round terminal, a pair…
|