GTS42NL N Male 42 dB Replacement Load

GTS42NL N Male 42 dB Replacement Load

$175.00

  • RLT (Replaceable Load Technology
  • 42 dB Return Loss for high accuracy
  •  Easy replacement & OSL repair
  • Lower OSL operating cost
  • Designed and made in the USA

 

     GTS42NL

SKU: GTS42NL Category:
Brands:
Brands
Product price
Additional options total:
Order total:
View cart

Description

GTS42NL Futures

  • RLT (Replaceable Load Technology
  • 42 dB Return Loss for high accuracy
  • Easy replacement & OSL repair
  • Lower OSL operating cost
  • Designed and made in the USA

The GTS42NL  is a replacement load for the RF Test Parts.   These cal kits have exceptionally long open and short lifetimes. As with all terminations, the load is more fragile and can be damaged by exposure excessive RF power. RF Test Parts recommends periodic load verification. This load provides very good return loss of 42dB for accurate single ended measurements. The return loss optimized below 6 GHz, and is usable above 11GHz for network analyzer use.

The RF load is easily replaced:

1. Remove the split ring that holds the lanyard, if installed.
2. Unscrew the retaining screw with a 5/64” (2mm) hex key wrench.
3. Slide out the old load.
4. Insert the new load so that the side hole aligns with the screw hole.
5. Firmly tighten the screw until the lanyard eye cannot rotate or move.
6. Replace the lanyard ring, if desired.

Additional information

Weight 0.040 kg

Electrical Specifications:

Impedance: 50 Ohms
Frequency: 11GHz (usable to 18 GHz)
Load Power Rating: 2W (33dBm)

Mechanical Specifications:

Weight: 1.5oz (40g)
Torque: 10 in-lbs (1.1N-m)
No gasket for easy connection
Brass w/ Gold finish pins
Cycle Life: 500 minimum