3000HR High Resistance Buildup Box
- Electrometer currents to 10nA
- REsistance from 1 Mohm to 100 Gohm
- Traceable to 1 GOhm standard
- Description
- Additional information
- Specifications
Description
3000HR High Resistance Buildup Box
INTRODUCTION
The 3000HR provides a traceable source for high voltage resistance, consisting of a buildup box of 1 GOhm and 10 Gohm resistors, allowing a buildup to 100 Gohm.
High value resistance standards are required by many laboratories for calibration of modern multimeters with extended resistance ranges but are costly and difficult to maintain confidence.
With the 3000HR, with comparison to a 1 GOhm standard, values of up to 100 GOhm can be generated.
To assist with automating the calibration of sensitive electrometers, an RS232 interface is provided to switch decade values from 1 MOhm through to 100 GOhm, suitable for resistance calibration and low current sourcing
Additional information
Dimensions | 45 × 44 × 9 cm |
---|
GENERAL SPECIFICATIONS | |
DESCRIPTION | High Resistance Reference / Transfer Standard |
INTERFACE | RS232 via 9 pin ‘D’ type connector fitted to rear panel |
INDICATORS | 5 x LED Indicators for 5 preset output ranges |
OUTPUTS | 10 MOhm
100 MOhm 1 GOhm 10 GOhm [Comprised of 10 x 1 GOhm resistors in series] 100 GOhm [Comprised of 10 x 10 GOhm resistors in series]
1 to 10 GOhms Resistor Bank Link 1 GOhm resistors together to provide decade values from 1 GOhms to 10 GOhms
10 to 100 GOhms Resistor Bank Link 10 GOhm resistors together to provide decade values from 10 GOhms to 100GOhms
Resistor banks provide the ability to link each resistor together to obtain a combined measured value from the sum of the resistor bank. |
POWER | 110V OR 230V , 50/60Hz. IEC Inlet on rear panel |
DIMENSIONS | 45cm x 44cm x 9cm |
FRONT PANEL LAYOUT |
REAR PANEL LAYOUT |