6040 Universal Pulse Generator
The Model 6040 pulse generator provides superior performance characteristics. For example, the timing accuracies of 0.01% for frequency and 0.2% for delay and width are unusual for a pulse generator. The triggering jitter of 25 ps provides synchronizing capabilities usually associated with only the very best digital delay systems. Plug-in modules let you select the output configuration you currently need.
- Description
- Additional information
- Specifications
- Options
Description
- Delay Setup
- Trigger Level Setup
- Optical Power Setup
Even the mainframe 6040 without any module provides capable positive and negative outputs. Capabilities of the mainframe with its modules include: single pulse, double pulse, impulse, external drive, external modulation and CW. The modules themselves determine which of these capabilities are available. Some modules can operate to full repetition rate of the mainframe; others are limited to a smaller number.
Additional information
| Weight | 7.3 kg |
|---|---|
| Dimensions | 40.6 × 32.4 × 13.3 cm |
Listed below are the timing and output characteristics of the 6040 mainframe. However, modules determine specific performance limits and characteristics such as maximum pulse width and maximum rep rate.
| Internal Trigger | 0.01Hz to 100 MHz, Accuracy: 0.01% of setting |
| Pulse Width | 3 ns to 640 S, resolution of 1 ns or 5 digits, accuracy
0.2%, jitter 25 ps or 0.005%. |
| Delay | 0 ns to 640 S, resolution of 1 ns or 5 digits, accuracy
0.2%, jitter 25 ps or 0.005%. |
| ——- | ———- |
| Trig Out | A 3 ns wide, 2V high T0 pulse into 50 ohms. |
| Pulse Out | A positive 4V pulse into 50 ohms. 1 ns risetime, 1.5 falltime. |
| ECL Out | An ECL level output into 50 ohms. 700 ps risetime. |
| ——- | ———- |
| External Trigger | 0 to 100 MHz, slope select and threshold adjust, 50 ohm
input impedance. |
| Single Cycle | A push button initiates a single pulse cycle. |
| Double Pulse | A pair of identical Width pulses separated by the Delay
for each event. |
| Impulse | A sub-ns impulse is provided for each event. (optical
only) |
| External Drive | An incoming waveform drives a modules output between
two selected levels. |
| External Modulation | Analog or digital signals modulate the output of an
optical module with high bandwidths. (optical only) |
| CW | Constant light level outputs. (optical only) |
Electrical Modules
These interchangeable modules provide electrical signals from 5V, 180ps risetimes to 800V, 10 ns risetimes. The higher amplitudes have slower risetimes and the slower risetimes result in reduced maximum rep rates.
| Electrical Module | Characteristics | Amplitude | Offset | Max Rate | Risetime | Min Width | Max Width |
| into 50 ohms | |||||||
| 201E | fast risetime
high rep rate |
5 V | +/- 5 V | 100 MHZ | 180 ps | 1 ns | 640 S |
| 202H | high pulse power | 300 V | None | 500 KHZ | 5 ns | 12 ns | .005%/us
droop |
| 310H | Higher pulse power | 800V | None | 40 KHZ | 15 ns | 25 ns | 1%/us
droop |
Optical Modules
These interchangeable modules provide wavelengths of 635 nm, 650 nm, 660 nm, 850 nm, 904 nm, 1064 nm, 1300 nm and 1550 nm. Other wavelength options may be available so check with the factory if you have special needs. The optical modules offer rep rate, delay and width control as well as amplitude adjust essentially providing the optical equivalent of an electrical pulse generator. For all the modules, light is conveniently provided at end of an optical fiber for easy routing on an optical bench or to a test system.
| Optical Module | Wavelength | Peak Power | Mode | Max Rate | Min Width | Max Width | Impulse | CW | Ext Mod | Ext Dr |
| 065 | 650 nm
635, 660 available |
2 mW
higher available |
multi | 100 MHz | 3 ns | 640 S | yes | yes | yes | yes |
| 085 | 850nm | 2 – 20mW | multi | 100 MHz | 3 ns | 640 S | yes | yes | yes | yes |
| 090 | 904 nm | 1 – 20mW | single | 100 MHz | 3 ns | 640 S | yes | yes | yes | yes |
| 106C | 1064 nm | 1-20mW | single | 100 MHz | 3 ns | 640 S | yes | yes | yes | yes |
| 106H | 1064 nm | 50 – 200mW | SMF/MMF | 2 KHz | 10 ns | 25 ns*
*4 widths only |
contact
factory |
pulse
only |
no | no |
| 130 | 1300 nm | 1-10mW | single | 100 MHz | 3 ns | 640 S | yes | yes | yes | yes |
| 155/8 | 1550 – 1580 nm | 1-10mW | single | 100 MHz | 3 ns | 640 S | yes | yes | yes | yes |
| 155H/8H | 1550-1580nm | 50-200mW | SMF/MMF | 2 KHz | 10 ns | 25 ns*
*4 widths only |
contact
factory |
pulse
only |
no | no |
