J0GSAP331B Spectrum Compact 0.3-3 GHz basic kit for USA

Spectrum analyzer with touchscreen, 0.3 – 3.000 GHz

 

  SAF Spectrum Compact datasheet J0SSAP33

 

 

Description

J0GSAP331B Spectrum Compact 0.3-3 GHz basic kit for USA

J0GSAP331B Spectrum Compact 0.3-3 GHz basic kit for USA Kit consists of

Spectrum Compact 0.3-3 GHz, AC/DC USB-C charger, USB-C cable, USB-C to USB-A adapter

J0SSAP33, J0AB451Ci2, J0ACUB05, J0ACUA31

J0SSAP33 Spectrum Compact 0.3-3 GHz

J0SSAP33 Spectrum analyzer with touchscreen, 0.3 – 3.000 GHz

Measurements

  • Channel Power (measures the total power in a specified bandwidth)
  • Adjacent channel power
  • Signal bandwidth
  • Center frequency
  • Interference detection
  • Mask

Setup Parameters

  • Frequency: Center/Start/Stop
  • Trace mode: Normal, Max hold, Cumulative, # of Averages, Min/Max Hold
  • Span: Max Span, Min Span, Selected Span

Save

  • Proprietary format
  • Saves actual data

Sweep Functions

  • Sweep: Continuous, Manual Trigger

Trace Functions

  • Trace operations: Normal, Max hold, # of Averages, Cumulative, Min/Max Hold

Marker Functions

  • Marker: Peak search, set marker to center

Settings

  • LNA ON/OFF
  • RBW, VBW

 

Frequency

Frequency Range 300 – 3000 MHz

Frequency Resolution 10 kHz

Frequency Reference     Aging ±1.0 ppm/1 year

Accuracy: ±2.5 ppm (25°C ±25°C) + aging

Frequency span 1 MHz to full

Bandwidth (Performance Sweep Mode)

RBW 10 kHz; 30 kHz; 100 kHz; 300 kHz

VBW 1 kHz; 3 kHz; 10 kHz; 30 kHz; 100 kHz;

Amplitude Ranges

Measurement Range DANL to +20 dBm

Amplitude Accuracy (single sine wave input, Performance Sweep Mode) 20° C to 30° C Typical: ±1 dB

VSWR 300 – 3000 MHz < 1.5
Input attenuator 30 dB with 1 dB step
SSB Phase Noise

20°C to 30°C, Fc = 1 GHz

Carrier offset                                 100 kHz offset                               <-90 dBc/Hz

Maximum Input Level

DC voltage                                      0 V

CW RF power                                 Attenuation = 30 dB ; + 20 dBm (100 mW), LNA = OFF Max. Damage level            + 27 dBm

Displayed Average Noise Level (DANL)

Attenuation = 0 dB, RBW = VBW = 10 kHz, AVG detector, trace average 16, 20°C to 30°C, input impendence = 50 Ω

LNA ON      300 MHz to 3 GHz                   -128 dBm typ

LNA OFF    300 MHz to 3 GHz                   -108 dBm typ

Level Display

Trace detectors           AVG; MAX; MIN

Trace functions            Clear write, max hold, average, cumulative,

min/max hold

Frequency response

300 – 3000 MHz; amplitude accuracy ±1 dBm

LNA

Gain 300 – 3000 MHz +20 dB

RF Input Connector

Impedance                      50 Ω (nom.)

Connector                       SMA F