GSI-Protek 8354 Digital Mixed Oscilloscope (Bandwidth 350 MHz)

The NEW Protek 8000 Series consist of two types of line-up.

The first line-up is recommended for efficient and practical use. It offers clean & fast signal analysis, 8-inch high-resolution display, high memory of 28Mpts, basic serial BUS decoding.

It is a reasonable product that can be effectively used in various measurement environments.

SKU: 8354 Category:
Brands:
Brands

Description

The NEW Protek 8000 Series consist of two types of line-up.

The first line-up is recommended for efficient and practical use. It offers clean & fast signal analysis, 8-inch high-resolution display, high memory of 28Mpts, basic serial BUS decoding.

It is a reasonable product that can be effectively used in various measurement environments.

  • Bandwidth 100MHz 
  • Real time sampling rate, Analog channel: 1GSa/s
  • Provide 2 or 4 analog channels
  • A variety of serial protocol trigger and decode functions (I2C, SPI, UART/RS232, CAN, LIN, USB, FLEX RAY)
  • A variety of smart trigger functions (Pattern, Window, Interval, Drop-Out, Runt)
  • Support history function and segmented memory (std. up to 200,000 frames)
  • Max. Waveform capture rate up to 200,000wfs/s
  • 26 kinds of automatic waveform measurements,support measurement statistics function
  • Advanced waveform math operations (FFT, MATH)
  • Complete connectivity: USB Host, USB Device (USBTMC, Pict-Bridge), LAN(VXI-11), EXT-TRIG,PASS/FAIL,TRIG OUT
  • Support SCPI remote control commands
  • Multi-language user interface and built-in online help system
  • 8” TFT-LCD(800*480)

Additional information

Weight 5.2 kg
Dimensions 35.2 × 11.2 × 22.4 cm
  • Bandwidth 70MHz,100MHz,200MHz,300MHz
  • Real time sampling rate, Analog channel: 2GSa/s, Digital channel: 500MSa/s (optional)
  • Provide 2 or 4 analog channels, 8 digital channels (optional)
  • Built-in 25MHz function/arbitrary waveform generator(optional)
  • A variety of serial protocol trigger and decode functions (I2C, SPI, UART/RS232, CAN, LIN)
  • A variety of smart trigger functions (Pattern, Window, Interval, Drop-Out, Runt)
  • Support HDTV trigger
  • Support history function and segmented memory (std. up to 80,000 frames)
  • Waveform capture rate up to 110,000wfs/s
  • Hardware-based zoom function and high speed Pass/Fail function technology
  • 32 kinds of automatic waveform measurements,support measurement statistics function
  • Advanced waveform math operations (FFT, differential, integral, square root)
  • Complete connectivity: USB Host, USB Device (USBTMC, Pict-Bridge), LAN(VXI-11), EXT-TRIG,PASS/FAIL,TRIG OUT
  • Support SCPI remote control commands
  • Multi-language user interface and built-in online help system
  • 8” TFT-LCD(800*480)
Models Protek 8352 Protek 8354 Protek 8502 Protek 8504
Bandwidth 350 MHz 500 MHz
Analog Input Channels 2 CH (1MΩ/50Ω) 4 CH (1MΩ/50Ω) 2 CH (1MΩ/50Ω) 4 CH (1MΩ/50Ω)
Digital Input Channels Logic 16 CH ( Digital Logic Selected Optional )
Real Time Sampling rate 2.5 GSa/s (Each Channel : 1.25GSa/s)
Memory Depth 70 Mpts
Rise Time ≤ 1 ns ≤ 1 ns ≤ 750 ps ≤ 750 ps
Coupling Mode AC, DC, GND
Vertical Resolution 8 bit
Vertical axis range 1mV/div ~ 20 V/div (1-2-5 base)
bandwidth limit 20 MHz
DC Gain Accuracy ≤ ±3% (Sampling or average sampling method)
Time base range 2ns/div ~ 40s/div (1-2-4 base)
Time base Accuracy ≤ ± (50+ 2×Service Life)ppm
Time base mode YT, XY, ROLL, 4 split screen function, ZOOM
Waveform capture rate Max. 1,000,000 wfms/s (Fast Mode)
Frequency Counter 6 Digit
Acquire Mode Sampling, peak detection, high resolution, envelope, and average
Waveform display method sin(x)/x
Trigger Mode Edge, Pulse width, Runt, Window, N-edge, Delay, Time out, Duration, Setup/Hold, Slope, Video, Code Trigger
Decode Mode I2C, SPI, USB, CAN, CAN-FD, LIN, RS232, FlexRay, Bode plot loop test (Optional)
 

36’s Measurement Parameter

Maximum, minimum, peak-to-peak, median, top, bottom, amplitude, period average, average, periodic RMS, RMS, overshoot, preshoot, frequency, period, rise time, fall time, positive pulse width, negative pulse width, rise delay, fall delay, FRR, FRF, FFR, FFF, LRF, LRR, LFR, LFF, positive duty ratio, negative duty ratio, phase, area,

cycle area, etc.

Cursor Mode Manual, Tracking cursor display
Math Mode A+B, A-B, A×B, A/B, FFT, logic, digital filtering, advanced
Logic Function AND, OR, NOT, XOR
Built-in Arbitrary waveform/function generator

output frequency range (50MHz, 250MSa/s, 2CH

Resolution : 1μHz ) (Optional)

Sine wave : 1μHz~50MHz / (Harmonic distortion : < 1% (DC~20kHz, 1Vpp) )
Square wave : 1μHz~15MHz / (Duty : 1~ 99%)
Ramp wave : 1μHz~400kHz / (Symmetry : 0.1~99.9%)
Pulse wave : 1μHz~15MHz / (Pulse width : ≥20ns)
Gaussian Noise : 50MHz bandwidth (-3dB) (typical value)
Arbitrary wave : 1μHz~5MHz / (Vertical Resolution : 16 bit. Memory depth : 512kpts)
Output amplitude range 10mVpp~3Vpp; (50Ω) / 20mVpp~6Vpp; (High Impedance)
DC offset ±1.5V(50Ω), ±3V (High Impedance) l Accuracy : Offset setting ±2%
Modulation function AM , FM
Data Storage Internal : 256 data, External : USB Disk Storage (Bitmap file), wave recording : ~120,000Frames
Display 8”inch Pull Touch TFT LCD, RGB 800 x 480 pixels, 24bit True color
Interface USB-Host, USB-Device, EXT Trig, VGA, Pass/Fail
Input Power AC 100V ~ 240VACrms, 45Hz ~ 440Hz (2.5A, T 250V Fuse)
Environment Temperature : 0°C ~ +40°C, Humidity : ~RH +80%, Altitude : ~3000m
Size About 370(W)×185(H)×115(D) mm
Weight About 4.5 kg (Protek8352/8502) / About 4.8 kg (Protek8354/8504)
Standard Accessories Passive Probe kit, USB Interface Cable, AC Power Cable, GUI CD (in manual)

Optional Accessories             LXI(LAN), Digital 16CH Logic, Digital Multimeter Module, Decode Function, AWG (*Factory Only)