METINF006 Infrared Non Contact Forehead Thermometer

  • Temperature Range: -7 ~ 176°F (-22 ~ 80°C)
  • Distance to Spot Size Ratio of 2:1
  • FDA Listed, Medical-Grade, High Accuracy
  • Forehead Mode Accuracy: +/- 0.4°F (0.2°C) of reading from 95 to 107.6°F (35 to 42°C)
  • High Temperature audible ALARM when measurement exceeds 99.5˚F
  • Includes Batteries  / Auto-Off Saves Battery Power
  • Includes Employee Log Form

METINF006 Brochure

METINF006 Quick Guide

METINF006_Instructions

SKU: METINF006 Category:
Brands:
Brands

Description

METINF006 Infrared Non Contact Forehead Thermometer

Infrared Forehead Thermometer with 2:1 D:S

MEDICAL-Grade High Accuracy Infrared Thermometer –for humans and more The last word when speed and accuracy for critical inspections of human body and common surfaces is in demand.This is one of the most accurate infrared thermometers manufactured today!

Features

  • Total Temperature Range: -7° to 176° F (-22° to 80°C)
  • Special Body Temp Zone: 93.2° to 108°F ( 34° to 2°C)
  • Distance to Spot Size Ratio of 2:1
  • Conversion of forehead temp to internal body temp
  • Accuracy +/- 4°F (0.2°C) of reading from 95˚ to 107.6˚ F (35˚ to 42˚ C) with1/10thdegree resolution
  • Below 71.6˚ F : +/-2°C (+/-4°F) +/-0.1˚ F and above 108˚ F
  • Storage of previous 25 readings taken
  • High Temperature audible ALARM when measurement exceeds 99.5˚ F
  • Blue hue back-light LCD display, select C or F, Auto Off
  • Uses 2 x AAA batteries and provides power for about 3000 readings
  • IP22 Water resistant case

Weight and Dimensions: 4 oz. ~ 6” x 2” x 1.5”

 

 

 

 

How to use

1. Always make sure the probe lens is clean without any damage and the forehead is clean.
*Warning: Choking from swallowing small parts and batteries by children or pets is possible, please keep small parts and batteries at places where children and pets can’t reach.

2. Power on: Press the “ON/MEM” button
3. Measuring body temperature on the forehead:

Points for attention:

a. Forehead temperature is displayed in oral mode. This mode converts the forehead temperature to display its “oral-equivalent” value.
b. Before the measurement, the subject should stay in a stable environment for 5 minutes and avoid exercise, bath for 30mins.
c. Remember to keep the forehead area clean and away from sweat, cosmetics and scar while taking temperature.
d. The “Clinical Bias” is -2.5 ~ -3.1°F (-1.4 ~ -1.7°C).
e. The “Limits of Agreement” is 0.98.
f. The “Repeatability” is 0.36°F (0.20°C)

4. Measuring surface temperature:
4.1 After power on, press and hold the “ON/MEM” button, and press the “START” button one time for “Infrared thermometer” mode to see icon on your LCD display. In this mode, you can get the target surface temperature.
4.2 When you press the “START” button, you will get the real time temperature immediately. If you press and hold the “START” button, the reading of measurement will be continuously updated.
4.3 Applications include temperature measurements for water, milk, cloth, skin or other objects.
* Note: This mode shows the actual and un-adjusted surface temperature which is different from the body temperature.
5. Power off:
5.1 Device will automatically shut off if left idle for more than 1 minute to extend battery life.
5.2 Manually power off the device by pressing the “ON/MEM” button.

Additional information

Weight .113 kg
Dimensions 3.81 × 5.08 × 15.24 cm

Temperature Sensing Range

-7 ~ 176°F (-22 ~ 80°C)

Temperature Accuracy

Accuracy +/- 0.4°F (0.2°C) of reading from 95 to 107.6°F (35 to 42°C)

Temperature Resolution

0.1°

Temperature Scale

°F or °C

Type of Sensor

IR Thermometer

Dimensions

6″ x 2″ x 1.5″

Weight

0.25 lbs

Display

BackLit LCD

Power

(2) AAA BAtteries

Battery Life

~3000 readings (typical)

IP Rating

IP22

Special Notes

FDA Listed
  • (1) Medical Grade IR Thermometer
  • (2) AAA Batteries
  • Expert Technical Support
  • Employee Temperature Log Form
  • Due to today’s health concerns this product is not returnable. All sales are final.